Wonderswan 3D Printed Cartridge Case Set of 12

Due to shipping costs, system fees, material costs, and the time involved in production, I cannot accommodate discount requests.

Swan cartridges have fragile terminals and labels, and will degrade quickly without their original cases.

When trying to collect Wonderswan games affordably, you'll frequently encounter cartridges sold without their cases.

I ended up with many loose cartridges myself, and because I wanted a large quantity of cartridge cases for storage, I manufactured some for myself and acquaintances.
However, they turned out to be surprisingly useful, and since people wanted more, I started distributing them.

These are printed with clear PLA resin, allowing you to identify game titles from the outside. (Due to the nature of layered printing, the transparency is similar to frosted glass.)

The cartridge can be inserted either way, but the lock is only on one side. If inserted in the reverse direction, it can be used without locking. (See photo 4)

I personally store frequently played titles on the unlocked side, filling trays with cases.

Because they are thin and slightly smaller than original cases, you can store more when using trays.

I will remove the excess flashing as much as possible (though it will not be as much as shown in photo 5). If you are concerned about flashing or surface residue, please trim it with a cutter or file.

For shipping, the items will be secured with masking tape or painter's tape and sent directly in a Yu-Packet Post Mini envelope.

I perform an insertion check on all items, but please understand that minor scratches and individual differences may occur due to the nature of 3D printing.