HUSKY (Husky) Tripod Head
This is a used HUSKY tripod head. It was used with care and has been tested for operation. Before listing, I wanted to remove the sticker from my beloved Hasselblad camera, but I left it on as there was a possibility of leaving behind residue. Please purchase if you are not concerned about this.
The hole (female thread) for connecting to the tripod is a large screw (3/8 inch diameter, approx. 9.5mm). The male screw for connecting to the camera is a small screw (1/4 inch diameter, approx. 6.35mm).
As shown in image 7, by removing the pan handle, connecting it to the tilt handle, and then tilting the camera platform, it becomes compact when integrated with the tripod, making transportation slightly easier.
- Weight: Approx. 1300g
- Height (bottom of tripod head base to cork sheet surface): 145mm
- Material: Duralumin (aluminum alloy)
Thank you for viewing.
The hole (female thread) for connecting to the tripod is a large screw (3/8 inch diameter, approx. 9.5mm). The male screw for connecting to the camera is a small screw (1/4 inch diameter, approx. 6.35mm).
As shown in image 7, by removing the pan handle, connecting it to the tilt handle, and then tilting the camera platform, it becomes compact when integrated with the tripod, making transportation slightly easier.
- Weight: Approx. 1300g
- Height (bottom of tripod head base to cork sheet surface): 145mm
- Material: Duralumin (aluminum alloy)
Thank you for viewing.
Category
Camera Accessories
Condition
Some scratches/marks
Shipping
Included in price (by seller)
From
Tokyo
Customers Also Viewed
Was this page helpful?
marty.unleash.wiring disabled
