Cat tower parts: Hex wrench, joint bolt, washer, spacer

ottostyle.jp
Parts for the Climbing Cat Tower with Hammock.

[Product Contents]
Tension rod set fabric, top board
1 spacer
2 joint bolts
1 washer
2 hex wrenches
1 spanner
Instruction manual

[Dimensions]
Tension rod set fabric: Approx. 37cm x 37cm
Tension rod set board: Approx. 16cm diameter x 4cm thick, 7mm hole diameter
Spacer: Approx. 12cm diameter x 1.2cm thick, 1cm hole diameter
Joint bolt: 8cm length, approx. 0.9cm diameter
Hex wrench: 6mm and 5mm
Washer: 2cm diameter, 1cm inner diameter
Spanner: 13mm and 17mm across flats

The tension rod set is designed to attach with Velcro.
This item has been used for about 2 years. The fabric has been washed. There is some pilling on the back of the fabric.
The joint bolts, spacer, and tools may not be from ottostyle.jp.

We generally do not accept price negotiations due to shipping costs, cleaning effort, packing, and shipping labor.
Please purchase directly without commenting, if possible.
For personal reasons, I am not good at responding to questions and it can be tiring. If you have questions, please purchase unless it is an exceptional circumstance. (Please do not comment if you do not intend to buy.)
This is a used item! Inspection is done by an amateur. Please do not expect the same level of service as a store.
We do our best to inspect, clean, and pack, but it is impossible to identify all scratches and defects. If there are any defects other than those described here, it is not malicious, but simply that they were not noticed. The seller is an amateur and a human being, just like you.
Furthermore, we generally consider this to be an agreement for a transaction between amateurs, and we do not accept returns.
We have a cat.
We will not reply to comments from those who do not seem to have read the product description.
Thank you for your understanding.

Cat Tree