Gas/CO Alarm XW-715S with Automatic Test Function

Manufacturer's Suggested Retail Price: ￥17,600
Detection Targets: City gas (12A/13A), Fire (smoke), Carbon monoxide (CO)

Features:

* A multi-functional alarm that detects gas leaks, CO, and fire in the kitchen with a single unit.
* Fire sensor is a smoke detection type.
* Alerts you with lights and voice.
* Easy installation on plasterboard using the included mounting hook.
* Features an automatic initial inspection function.
* Includes a temporary alarm silence function.
* Indicates expiration date and device abnormalities with lights and voice.
* Equipped with a function to display the cause of the alarm.
* Certified as a residential disaster prevention alarm.
* Certified by the Japan Gas Appliances Inspection Association.

Model: XW-715S
Detection Principle: City gas: Semiconductor type, CO gas: Semiconductor type, Fire: Smoke detection method (photoelectric)
Target Gases: City gas (12A, 13A gas, lighter than air) - CO
City Gas:
Alarm Gas Concentration:
Alarm: Alarm within 60 seconds for city gas at 1/4 of the lower explosive limit concentration.
Warning: Warning for city gas below the alarm gas concentration.
CO Gas:
Alarm Gas Concentration:
Alarm: Alarm within 5 minutes for 550ppm CO, alarm within 10 minutes for 300ppm CO.
Warning: Warning within 5 minutes for 300ppm CO.
Fire Detection Performance: Type 2
City Gas:
Alarm Method: Instantaneous alarm type, automatic reset. Alarm: Red (gas alarm) light ON, synthesized voice alarm sound. Warning: Red (gas alarm) light flashing.
CO Gas:
Alarm Method: Alarm: Instantaneous alarm type, automatic reset. Warning: Delayed alarm type. Alarm: Yellow (CO alarm) light ON or flashing, synthesized voice alarm sound. Warning: Yellow (CO alarm) light flashing.
Fire Alarm Method: Instantaneous alarm type, automatic reset. Red slide (fire alarm) light ON, voice alarm sound.
Power Supply: AC100V ±10%, 50/60Hz compatible
Power Consumption: Standby: Approx. 0.7W, Alarm: Approx. 1.2W
External Output:
Signal:
Gas: 3-level voltage-enabled 2-wire system (0V when power is OFF and during fault diagnosis, DC6V during standby, DC12V during city gas alarm, DC18V during CO alarm)
Fire: Inter-alarm fire linkage input/output. Standby input (DC30V or less), alarm output (DC1.2V or less, 100mA)
Operating Temperature Range: 0℃ to +40℃ (non-condensing)
Dimensions: W85 × H125 × D43.5mm (excluding protrusions)
Weight: Approx. 290g