Hole Filling Putty, White, 3 Pieces

Features
Safe to use as it is water-based
Minimal shrinkage due to glass balloon formulation
Easy to use even for large dents
Can be painted with water-based or oil-based paints
Sandable
Uses

Dents in plywood
Dents in concrete and mortar
Applicable Materials

Wood, concrete, mortar, plasterboard, etc.

* Can be used indoors and outdoors, but avoid contact with water such as rain until dry.
* Do not use in areas prone to water contact such as bathtubs and kitchens, or in humid areas.
* Do not use for bonding precious metals or high-value items.
* Do not use for bonding or repairing areas that come into direct contact with skin or food/drink.
* Insufficient bonding strength may be obtained for areas with small bonding surfaces (e.g., eyeglass frames).
* Cannot be used for containers holding living organisms.

Materials Not Suitable For Use

All other materials not listed above

How to Use

1. Thoroughly remove dirt and oil from the application area and ensure it is dry.

2. Mix the product well. If it is too stiff, add about 1 teaspoon (approx. 4cc) of water per 200g and mix well. Water may appear on the surface, but it will not affect the product if mixed well.

3. Fill the application area with the product, pressing it in with a spatula.

4. After drying, lightly sand the surface. (Use sandpaper of approximately #180.)

* Estimated drying time (at 20°C and 75% humidity)
* Approximately 30 minutes for a thickness of 0.3mm
* Approximately 3 hours for a thickness of 1.5mm
* Approximately 5 hours for a thickness of 5.0mm