Air Regulator Air Pressure Adjustment Water Oil Dust Removal Filter

Thank you for viewing.
Immediate purchase is welcome!

This product can:
- Remove oil, moisture, dust, and other contaminants from the air supplied by the air compressor.
- Equalize air pressure while the compressor is running.

Product Information
★☆★☆★☆
Pressure Gauge Display: Analog
Display Units: Mpa, kgf/cm2
Pressure Regulation Range: 0.15-0.85 Mpa
Temperature Range: -5 to 60℃
Filter Material: Copper
Air Inlet Diameter: G1/4
Size: Approx. 16 cm (height) x 4 cm (width) x 7 cm (depth) (excluding mounting bracket)

[Set Contents] (1 of each)
- Main unit
- Mounting bracket
- Pressure gauge
- Male coupler (20PP)
- Female coupler (20SP)
- Seal tape

[Coupler Installation]
When installing the coupler, wrap the seal tape around the threads 2-5 times evenly.
(Over-wrapping may reduce thread adhesion and cause air leaks.)

This is a regulator with a built-in air filter.

Filter
When the compressor draws in, compresses, and sends out air:
- Contaminated compressor oil may be mixed in.
- Moisture from the air condenses and accumulates in the tank during compression, and is expelled with the air when discharged.
This filter can remove such water, oil, and dust.

Regulator
The air supplied by the compressor varies in discharge force depending on whether it is running or stopped.
When used with air sprayers, the discharge pressure may be too strong, or the discharge amount may be uneven, making it difficult to use. This regulator allows you to adjust the discharge air pressure.

※Notes※
- Instruction manual is not included.
- The meter and high-speed coupler will be sent detached, so some simple assembly is required.
- As this is a general-purpose product, we cannot answer questions regarding product compatibility or usage.
- We are not responsible for any damage incurred during or after product installation.
Please use at your own risk.

If you are satisfied, please proceed with your purchase.
(=′ー｀)ノ Thank you!