Bath Vance 1000 PAAG Reheating Bath Heater

The condition is like new, in excellent condition.

I used it only once last year, but my bathtub is three times the usual size, so the hot water didn't get warm enough, and I gave up on using it.
When used in a tub of about 100L, the water quickly reaches 40°C, so there is no problem at all with standard-sized bathtubs.

The longer you use it, the greater the gas savings, so I hope it will be useful for your household budget savings.

[Product Details]
Top Highlights
About this product: External dimensions: Width 199 x Depth 148 x Height 296 mm Weight: Approx. 2.8 kg (product weight) Power supply: AC 100V ■Frequency: 50Hz/60Hz ■Power consumption: Max. 1000W ■Heater capacity: 850W + 150W
Power cord: [General cord]: Length 1.5m (2.0mm2 x 3C), Diameter 8.5mm, [Heat-resistant cord]: Length 3.0m (1.25mm2 x 5C), Maximum width 17.5mm, Diameter (7.2mm + 9.3mm) Safety devices: Ground fault interrupter with earth wire, dry-run prevention (float switch), overheat prevention/temperature control (thermostat), thermal fuse
Accessories: Tray, float strap, urethane feet From cold water: Summer average: Approx. 2-4 hours*1, Winter average: Approx. 8-12 hours or more (Note: Heating time may vary depending on water temperature, housing environment, bathtub size, etc.)
Manufacturer: Zoristen Co., Ltd. Home appliance made by a Japanese small and medium-sized enterprise, made in JAPAN *New model production started, 1 year manufacturer's warranty (long-term use product inspection service available after 1 year.)
Simple filtration device: Equipped with ceramic balls

PAAG
Yutame-shi Taro
Kumagai Denko
Submersible Heater
New Yu Bijin
24-hour bath
#FuroBans
#Yutame-shi Taro
#SubmersibleHeater