Convenient Cleaning Tool Drain Wire Brush Pipe Cleaner Flexible 3m
New, Unused
Length: 3m
[Wire Type, Double Spiral Structure]
This wire pipe cleaner uses a flexible, high-strength wire that can be freely bent along curves, regardless of the shape of the drain (S-trap, U-trap, P-trap, cross-shaped strainer, etc.), to effectively clear clogged drains. The double spiral structure makes it resistant to breakage, and the spiral-shaped head crushes stubborn debris that brushes cannot remove, thoroughly scraping away dirt. With a full length of 3 meters, this wire brush can reach deep into pipes to clean clogs and eliminate bad odors.
[With Rotating Handle, Easy to Clean]
The ergonomically designed handle is easy to grip, making it simple to insert and retract the wire and scrape away dirt. Simply insert the wire into the drainpipe of a toilet or sink and turn the handle to quickly resolve clogs and issues caused by hair, sludge, food scraps, and more. This powerful toilet clog remover allows you to easily clear toilet clogs without getting your hands dirty, significantly reducing cleaning time for your water areas. Made with durable, rust-resistant stainless steel wire, it's easy to clean and maintain for hygienic use.
[Suitable for Various Scenes]
Features an ultra-thin 0.8cm diameter wire that is long and slender, making it easy to clean even narrow drains in sinks and bathtubs. Can be used in toilets, kitchens, bathrooms, bathtubs, and for P-trap and S-trap pipes. It's not only suitable for home use but also works great as a professional cleaning brush. *Cannot be used for drains with holes smaller than 1cm, grate-shaped drains, or pipes with traps. Depending on the clog condition and pipe diameter, it may not be usable even for P-trap and S-trap pipes. Some drainpipe shapes in kitchens and toilets may not allow passage.
[Easy to Operate]
How to use the wire brush: 1. Insert the wire brush into the drain and push until it reaches a dead end. 2. Once you reach the clog, rotate or move it up and down to penetrate. 3. When you feel no resistance, retract the wire and run a small amount of water to check if the clog has been cleared. It is recommended to wrap the wire with an old cloth or paper towel while retracting it to avoid getting your hands dirty.
1-27
Length: 3m
[Wire Type, Double Spiral Structure]
This wire pipe cleaner uses a flexible, high-strength wire that can be freely bent along curves, regardless of the shape of the drain (S-trap, U-trap, P-trap, cross-shaped strainer, etc.), to effectively clear clogged drains. The double spiral structure makes it resistant to breakage, and the spiral-shaped head crushes stubborn debris that brushes cannot remove, thoroughly scraping away dirt. With a full length of 3 meters, this wire brush can reach deep into pipes to clean clogs and eliminate bad odors.
[With Rotating Handle, Easy to Clean]
The ergonomically designed handle is easy to grip, making it simple to insert and retract the wire and scrape away dirt. Simply insert the wire into the drainpipe of a toilet or sink and turn the handle to quickly resolve clogs and issues caused by hair, sludge, food scraps, and more. This powerful toilet clog remover allows you to easily clear toilet clogs without getting your hands dirty, significantly reducing cleaning time for your water areas. Made with durable, rust-resistant stainless steel wire, it's easy to clean and maintain for hygienic use.
[Suitable for Various Scenes]
Features an ultra-thin 0.8cm diameter wire that is long and slender, making it easy to clean even narrow drains in sinks and bathtubs. Can be used in toilets, kitchens, bathrooms, bathtubs, and for P-trap and S-trap pipes. It's not only suitable for home use but also works great as a professional cleaning brush. *Cannot be used for drains with holes smaller than 1cm, grate-shaped drains, or pipes with traps. Depending on the clog condition and pipe diameter, it may not be usable even for P-trap and S-trap pipes. Some drainpipe shapes in kitchens and toilets may not allow passage.
[Easy to Operate]
How to use the wire brush: 1. Insert the wire brush into the drain and push until it reaches a dead end. 2. Once you reach the clog, rotate or move it up and down to penetrate. 3. When you feel no resistance, retract the wire and run a small amount of water to check if the clog has been cleared. It is recommended to wrap the wire with an old cloth or paper towel while retracting it to avoid getting your hands dirty.
1-27
Category
Pipe Brushes
Condition
New/unused
Shipping
Included in price (by seller)
From
Okayama
Customers Also Viewed
Was this page helpful?
marty.unleash.wiring disabled
