For AYA - Japanese Honeybee Langstroth Hive - 3cm Thick Boards

This listing is reserved for AYA. Please refrain from purchasing if you are not AYA.

Basic Product Contents (5-Tier Nesting Box)
1 Top Panel
1 Medicine/Feeding Chamber Box
5 Nesting Boxes
1 Entrance Hole Box
2 Bottom Panels (Summer and Winter)
1 Base

Product Dimensions:
Top Panel: 29cm (L) x 29cm (W)
Medicine/Feeding Chamber Box: Outer dimensions 29cm (L) x 29cm (W), Inner dimensions 23cm (L) x 23cm (W), Height approx. 8cm
Nesting Box: Outer dimensions 29cm (L) x 29cm (W), Inner dimensions 23cm (L) x 23cm (W)
(Height 12-13cm, quantity as specified)
Entrance Hole Box: Outer dimensions 29cm (L) x 29cm (W), Inner dimensions 23cm (L) x 23cm (W), Height approx. 11.5cm
Bottom Panel: Outer dimensions 24.7cm (L) x 30cm (W), Thickness 1.2cm (Summer panel will have Tricar net attached to match the inner diameter of the entrance hole box)
Base: 33cm x 35cm square, Height approx. 26cm
Total assembled height: approx. 111cm

The exterior and joining surfaces of the nesting boxes have been torched, but the interior surfaces have not been torched.

We primarily use cedar wood with a thickness of approximately 3cm. Please understand that there may be slight variations of a few millimeters in board thickness due to milling or warping correction, as well as uneven knots and grain, and that expansion/contraction or manual assembly may result in slight misalignments. Thank you for your understanding when making your purchase.