Belle Maison Air Drying, Float Drying, Indoor Drying, Room Drying, Easy Installation with Pins, Rainy Season

Belle Maison
Short indoor drying rack that can be installed with pins.
Unused item.
Will be shipped as is, as shown in the 9th image.

Installation guide: Space between each unit approximately 70-120cm wide.
- Set includes:
- Main units: 2
- Receiving parts: 2
- Drying rod
- Main unit fixing screws: 5 (includes 1 spare)
- Fixing pins: 40 (includes 6 spares)
- Pin pushing tool

- Unit dimensions (per unit):
- When stored: Approx. 9cm wide, 3.5cm deep, 35cm high
- When in use: Approx. 9cm wide, 28cm deep, 35cm high
- Drying rod: Approx. 2.2cm diameter (approx. 2.5cm at center), 82.5-140cm long

- Load capacity: Approx. 10kg total
- Main materials: ABS resin, aluminum, rod: steel (resin coating)
- Tools required for installation: Phillips screwdriver and measuring tape (not included)
- Made in Japan

For use on gypsum board walls in typical homes. Cannot be used on fragile walls such as earthen or plaster walls, or on hard walls such as concrete or plywood.

#IndoorDrying
#MinimalInstallationMarks
#LaundryNotFullyDry
#RainySeason