Magnetic Base Stand [Base: Kanetec, Stand: TOPINCN]
＊Magnetic Base Stand Details
Magnetic Base [Kanetec]
- Suction Power: 800N (80kgf)
- Mounting Screw Hole Size: M8x1.25, Depth 7mm
- Magnetic force can be turned ON/OFF with a lever.
- The suction surface has a V-groove on the bottom and a concave surface on the back, allowing selection according to application.
- The mounting screw holes on the top can be used as a base for jigs and equipment.
Magnetic Stand [TOPINCN]
- Locking and unlocking can be done by simply tightening the dial.
- When unlocking, it loosens from the top, preventing the tip from dropping.
- The arm is a flexible type that can be bent freely.
- The tip has a fine adjustment function.
The magnetic base and stand have been used infrequently, and all parts can be adjusted smoothly. This is a magnetic base stand that is close to new condition.
Magnetic Base [Kanetec]
- Suction Power: 800N (80kgf)
- Mounting Screw Hole Size: M8x1.25, Depth 7mm
- Magnetic force can be turned ON/OFF with a lever.
- The suction surface has a V-groove on the bottom and a concave surface on the back, allowing selection according to application.
- The mounting screw holes on the top can be used as a base for jigs and equipment.
Magnetic Stand [TOPINCN]
- Locking and unlocking can be done by simply tightening the dial.
- When unlocking, it loosens from the top, preventing the tip from dropping.
- The arm is a flexible type that can be bent freely.
- The tip has a fine adjustment function.
The magnetic base and stand have been used infrequently, and all parts can be adjusted smoothly. This is a magnetic base stand that is close to new condition.
Category
Reference Standards & Gauges
Condition
Almost new
Shipping
Included in price (by seller)
From
Gunma
Customers Also Viewed
Was this page helpful?
marty.unleash.wiring disabled
