Smart Tip Mount Set for CRS - Christia - DAIWA - WAKASAGI

This is a set of the Daiwa Christia CRS Series dedicated mount and the Smart Tip Mount.

Are you experiencing these frustrations while preparing for wakasagi fishing?
My case won't close with the variable adapter or tip extension adapter attached...
It's a hassle to thread the leader through the guides every time at the fishing spot...
We developed the Smart Tip Mount to solve these problems.
And with the highly-rated CRS dedicated mount, you can secure your reel in the case.

Made with a rubber-like material called TPU95 using a 3D printer.
It securely holds your precious rod tip without scratching it.

◎ Recommended Features!

- Start fishing immediately at the spot! A time-saving ally
Long rod tips are okay! With the leader already threaded through the tip, detach the tip and insert it into the hole on the side mount! When you arrive at the fishing spot, simply attach the tip to the reel. You'll be freed from the hassle of threading the leader through the guides at the location.

- Ample storage capacity
In addition to the tip attached to the reel, you can mount up to 4 spare tips. Even long rod tips fit securely in the case.

[Compatible Reels]
Daiwa Christia CRS, CRS+, CRS C+, CRS Cα
For 2 reels
(Please comment if you are changing to the CRT series)

[Compatible Cases]
Meiho Long Case 620
Daiwa Christia Wakasagi Sokkou Case
(Can also be used with cases of the same shape as above)

[Material/Specifications]
Material: TPU95

[Items Included]
- Smart Tip Holder A (Reel side)
- Smart Tip Holder B (Tip side)
- CRS Dedicated Body Front Mount V2 (2 pieces)
- CRS Dedicated Body Rear Mount (2 pieces)
- Holding Sponge (Large and Small) (1 each)
- Magnet Mounting Plate (2 pieces)

[Notes]
- If applying double-sided tape, please degrease the surface.
- The holes for the adapter holders may vary slightly in tightness depending on the manufacturer's tip insertion shape.
- When placing the tray, please check carefully to ensure it does not interfere with the rod tip or guides. If the guides of the extension adapter or variable adapter are in contact, rotate them to change the angle.
- The case, rod tips, electric reels, variable adapters, etc., shown in the images are not included.
- Please understand that the surface may be rough due to the nature of 3D printing.

Please comment if you have any questions.