Snow Peak Flag Pole Set - 3 Pieces

This is a flag stand specifically for Snow Peak tarp flags. Comes in a set of 3.
I made this myself so that the flags can be displayed upright without wrinkles or creases from storage.
To attach, similar to inserting into the tip of a pole, insert the flag into the fixed shaft, tighten the screw to secure, and attach the anti-fall/drop hook to the included adjuster.
The total height when a flag is attached is approximately 340mm, and the weight is approximately 350g.

[Set Contents]
Base: Steel, HL plated, Diameter 88mm, t=4mm
Bolt M6, Black felt attached to the back
Nut: Stainless steel, Diameter 10mm, Length 25mm, M6
Fixed Shaft: Steel, Black dyed, Length 45mm, M6
Tapped portion approx. 10mm
Adjuster: Aluminum silver (with rope)
Weight of set contents: Approx. 230g

[Notes]
The base surface has scratches and uneven plating. The bolt on the base is slightly tilted. The fixed shaft has had both ends of the bolt cut with a grinder and then coated with a black metal dye for rust prevention. The tip of the flag will touch the ground.
*Please check the images.
*As this is a handmade item, it may not have the same quality as a commercially produced product. Please consider purchasing only if you understand this.
*Tarp flags are not included.
Ships via Yu-Packet Post.