Snow Peak Tarp Flag Pole Set - 2 Pieces

This is a flag stand specifically for Snow Peak tarp flags. Comes as a set of two.
I made this myself so that the flags can be displayed upright without wrinkles or creases from storage.
To attach, similar to inserting into the tip of a pole, insert the flag into the fixed shaft, tighten the screw to secure it, and attach the anti-fall/drop hook to the included adjuster. The total height when the flag is attached is approximately 340mm, and the weight is approximately 350g.

[Set Contents]
Base: Steel, plated HL, diameter 88mm, t=4mm
Bolt M6, black felt attached to the back
Nut: Stainless steel, diameter 10mm, length 25mm, M6
Fixed Shaft: Steel, black dyed finish, length 45mm, M6
Tapped portion approx. 10mm
Adjuster: Aluminum silver (with rope)
Weight of set contents: approx. 230g

[Notes]
There are scratches on the surface of the base and uneven plating. The bolt attached to the base is slightly tilted. The fixed shaft has been cut at both ends of the bolt with a sander and then coated with a black dyeing agent for metal as rust prevention. The tip of the flag will touch the ground.
*Please check the images.
*This is a handmade item, so it may not have the same quality as a commercially produced product. Please consider purchasing only if you understand this.
*Tarp flags are not included.
Ships via Yu-Packet Post.