Billiard Tip Protector, Tip Protection, 12 x 5 pcs / 12.8 x 5 pcs, Total 10 pcs

Thank you for looking.
These are tap covers.

Will be shipped via Yu-Packet Post Mini.

[Product Contents]
12mm x 5 pieces
12.8mm x 5 pieces
Total length: approx. 25mm
10 pieces total

The shafts in the photos are a 12.75mm Avid shaft and an 11.8mm Synergy shaft.
They do not feel loose, so they should also work with slightly thinner cues.

The 12.8mm ones can be used for up to about 14mm.
Since it is soft silicone rubber, it will not become impossible to remove.

It's good to have spares.

Perfect for small gifts at billiard halls!

[Product Description]
As long as it's not too loose, it won't come off easily.
There are longer ones available, but if they are too long, they can actually dirty the shaft or make it difficult to remove. Therefore, around 25mm, which only covers the ferrule, seems to be just right.

[What is a Tap Protector?]
A tap protector is a cover for the tip, protecting the tip and also from humidity. It also prevents chalk stains in your cue case.

It is common to put the shaft into the cue case with chalk still on it, but if you continue to do this for many years, chalk powder will accumulate in the cue case, sticking to the cue case and shaft, which can cause the shaft to become dirty.

Please understand that there may be slight deformation.
They will fit the shape of your cue with use.

Item: Supplies

Type: Tap Cap

Billiard Shaft Tip Cap 10 pieces 1 set