Long Cast Cage DIY Set, 6 Pairs of Parts

DIY Set, Custom Orders Accepted.
You can choose two colors each for the upper and lower baskets.
Black, Red, Blue, Yellow, Green, Clear, Clear Pink, Glow-in-the-dark, and others.

Upper Basket Material: PETG or ABS or PC
PETG is a material with a good balance of weather resistance, heat resistance, and cost.
ABS is a material with excellent weather and heat resistance, and is also lightweight. Our upper baskets have buoyancy even without added floatation material, so it's no exaggeration to say it's the strongest material. Toxic gases are generated during the 3D printing process, and due to cost (material, electricity consumption), we rarely use it. However, we may use ABS or PC depending on material inventory.
Thickness: Approx. 1.3mm, Weight: Around 10g-12g
Maximum Diameter: Approx. 33mm
With the addition of approximately 40cc of floatation material, it should be around 35cc.
Air holes are provided in the upper chamber, which likely adds about 1cc of buoyancy.

Lower Basket Material: PETG or PLA
The construction is quite robust, so even PLA should be resistant to deformation from summer heat.
PLA has inferior weather and heat resistance compared to other materials, and we do not use PLA for our upper baskets.
Weight section hole depth: Approx. 30mm. Inner circumference options: 19mm, 16mm, 13mm. If not specified, 16mm will be used.
Lower basket weight: Around 12g-14g. It sinks without weight.

Color texture may vary depending on the material.
Photos are for reference. Please feel free to ask any questions.

Please note that this product is not eligible for discounts.

Thank you for viewing.