DOD Ankō Stand RX, Captain Stag Windscreen, Firewood Stand

Included as a bonus with the following three items is a no-brand fire blaster.
All are camping gear, so there are some dirt and scratches.

① DOD Ankō Stand RX LP1-753-BK
This is a lightweight, compact, and easy-to-use stand, although it has been discontinued.
The peg part is slightly bent, but please fix it yourself if it bothers you. (I used it without any issues.)

② Captain Stag UP-2712 [FIRE PROOF Bonfire Windscreen 170 Black]
New and unused

I kept it stored without using it because I obtained other products. In addition to the original rope, I will include a black reflective guy rope and a rope made with tensioners.
Also, the Captain Stag logo on the main unit has been removed by cutting the threads. (See photo 4)

③ Compact Log Stand
Shows signs of use

This is a handmade item modeled after the fallworks omamakinodai. It has been used a few times and has some scratches, but it can still be used. (Photos 8 and 9 are reproduced from the seller.)

The following is a transcription of the seller's description.

*Improved Version*
Magnets embedded at both ends of the center pole.
The legs attach!
Bands can be easily wrapped.

[Compact Storage with Band Included]
[Easy Setup]
[Can hold logs from 30cm]
[Adjust legs to match the ground and installation surface to maintain level]
[Can hold approximately 2 bundles of logs]

DIY

• How about adding an accent to your camping scene?
• If you were looking for a log stand, this is it!

Materials
Center pole ~ Coniferous tree
(Finished with Watco Oil + BRIWAX on natural wood)
Legs ~ Deformed round bar
(Diameter 10mm, black painted)

● Separate Type ●
Simple assembly type where deformed round bars are inserted into the four holes of the center pole.
Designed for portability.
(The four corners of the center pole are cut to accommodate the round bars.)
Can be stored in a Shelcon 25.

*Logs and photographic props are not included.
*This sale is for the center pole, 4 legs, and band.

Size
Center pole part ~ Approx. W37mm x H37mm x D360mm
Leg part ~ Approx. length 370 x diameter 10mm
Weight ~ Approx. 1.0kg
Hole spacing ~ Short 24cm, Long 28cm