GWINSTEK GSP-830 Spectrum Analyzer with TG Ref OP

Please be sure to check our profile before proceeding to the product description, as there are important notes regarding transactions.

GWINSTEK GSP-830 9KHz-3GHz Spectrum Analyzer - Working Condition

[Built-in Options]
〇 Tracking Generator
〇 Reference Frequency Oscillator (±1ppm stabilization module)
〇 300Hz RBW
〇 9kHz-3GHz 20db Preamplifier Option

Latest firmware updated.

Equipped with external reference input, etc., allowing for even more accurate measurements if you have a reference like GPSDO.

Also features an external monitor output for measurements on a large screen.

The unit was purchased with a cracked screen and used with an external monitor. The main unit's LCD screen and inverter have been replaced with new parts.

We tested the SG output (ExtRef Rb) at -20dbm for 100MHz, 500MHz, 1GHz, and 2.9GHz.

Please confirm the operating status in the images.

This is a surplus item from a corporate research laboratory; calibration history is unknown.

We are not a dealer, so we cannot answer questions regarding handling.

No support is provided, so please purchase only if you are knowledgeable.

The exterior has scratches, dents, repair marks, etc., so please check the images carefully.

The instruction manual can be downloaded from the following link:
https://y-d.co.jp/jpdf2/gsp830_m.pdf

Features
Low Noise Floor (-117dBm@1GHz, 3k RBW)
Sequence Programming Function
ACPR, OCBW, Channel Power, N-dB, Phase Jitter Measurements
10 Markers with Delta Marker and Peak Function

USB/RS-232C Interface
6.4-inch TFT Color LCD 640x480

#SpectrumAnalyzer
#Spectrum
#SpectrumAnalyzer
#Analyzer
#Signal
#Generator
#Oscilloscope
#Radio
#Amateur
#Noise
#Distortion
#Measurement
#Frequency
#Transceiver
#Power
#Meter
#Tester

Accessories include an RF-BNC conversion connector and a power cable.

Other testing equipment is not included.