Hishaku Ladle Butt Plug - For repairs, maintenance, customization, and DIY projects. Ideal for chum, krill, and black porgy/seabream fishing.

Easy Smart Repair!!
Perfect for processing, repairing, and customizing the butt plugs of ladles and bait ladles!

★Materials
Mount: Diameter 25mm, weather-resistant hard resin, red (paintable)
Hardware: Split pin stainless steel 4.5mm, total length 54mm
Please refer to the image for dimensions.
*The hardware is a split pin, so please open it as needed for use.

★Installation Requirements
① The insertion hole must be 5mm or larger and 40mm or deeper.
② The mounting surface must be flat, 25mm or larger in diameter, and suitable for adhesion.

★Installation Method
Insert the split pin into the mount, open the split pin as needed, check the mounting condition, fill the mounting hole with adhesive, etc., apply adhesive to the back of the mount and the mounting surface, and attach. If the surface is dirty, clean it.
Note) The split pin is quite hard, so pliers or similar tools are required.
Epoxy-based adhesives and fillers are recommended.

★Pro Tip
For increased strength, open the split pin larger than the hole diameter and close it with pliers while inserting.

The finish is quite clean and smart, with good strength, leading to increased satisfaction(^^)

Please understand that this is a simple repair item before considering purchase.

Image 8 shows a ladle that I have repaired and am currently using(^^)

Please take it if you need it.

Price negotiations are not accepted.
No shipping on weekends or holidays.
Shipping deadlines are in accordance with the app.