ScanSnap S1300/S300 Replacement Silicone Tube for Roller Repair

Set of 4, for use with tube cutter

Not genuine product
These are silicone tubes for replacing the feed rollers and ejection rollers of ScanSnap S300/ScanSnap S300M/ScanSnap S1300/S1300i.
Silicone tube: Inner diameter 5mm, Outer diameter 9mm, Length approx. 24mm (with some variation)

These are for replacing the degraded rubber rollers of your ScanSnap. There are two methods: complete disassembly or partial replacement by making a vertical cut. These tubes can be used as-is for complete disassembly, or by making a cut for partial replacement.

Method for Complete Disassembly Replacement
The process is too lengthy to describe here, so please search online. While it takes time, the result is a perfect appearance with no difference in normal use.

Method for Partial Replacement
1. Remove the feed rollers and ejection rollers by making a vertical cut with a cutter and pulling them off. If hydrolysis has progressed significantly, you may need to remove stickiness with anhydrous ethanol and cotton swabs.
2. Make a vertical cut in the new tube and set it onto the feed roller and ejection roller shafts, utilizing the rotation of the power button.
Some people use adhesive, but it is not necessary. Only apply adhesive if you wish to do so.

This is a product sold by an individual using leftover parts, so the quality differs from that sold by companies. If you are concerned about burrs, please purchase from a company.
If the quantity is insufficient, a refund will be processed.