CO2 Cartridge 12g - Safety Standard Certified - 10 Pack

Product Description
Compatible Models: Carbon8 M45, APS CO2 Gas Blowback Guns, BM-9, and other CO2 GBBs.
[Warning] This is a high-pressure gas (liquefied carbon dioxide) cartridge. Please handle with extreme care according to your equipment's instruction manual. Heating is extremely dangerous, so always use at room temperature (below 40°C). Do not use for edible purposes.
Contents: 10.5±1g
Weight: 45g
Diameter: Approx. 18mm
Length: Approx. 83mm
[Warning] Do not use with deteriorated magazines. Unexpected situations may occur when used with overseas-made magazines. If the muzzle velocity exceeds the legal limit, use a decelerator or similar device to bring it within the legal range before use.
[Warning] Leaving the cartridge inserted in the magazine for extended periods can lead to magazine deterioration. Please use it as soon as possible.
There may be variations in the tip shape. If using with magazines that require insertion with the discharge port facing upwards, please pay close attention to the tip shape. Depending on the shape, you may need to file it with a metal file or similar tool before use.

Safety Warning
This is a high-pressure gas (liquefied carbon dioxide) cartridge. Please handle with extreme care according to your equipment's instruction manual. Heating is extremely dangerous, so always use at room temperature (below 40°C). Do not use for edible purposes.
Contents: 12±1g
Weight: 45g
Diameter: Approx. 18mm
Length: Approx. 83mm
[Warning] Do not use with deteriorated magazines. Unexpected situations may occur when used with overseas-made magazines. If the muzzle velocity exceeds the legal limit, use a decelerator or similar device to bring it within the legal range before use.
[Warning] Leaving the cartridge inserted in the magazine for extended periods can lead to magazine deterioration. Please use it as soon as possible.
There may be variations in the tip shape. If using with magazines that require insertion with the discharge port facing upwards, please pay close attention to the tip shape. Depending on the shape, you may need to file it with a metal file or similar tool before use.